• Designed for ultrapure water, RO and water conditioning applications
• Ideal for continuous monitoring of process solutions
• Dosing relay

BL 983314 is a simple-to-operate resistivity controller designed for ultrapure water, R.O, and water conditioning applications. The BL 983314 resistivity controller is also ideal for continuous monitoring of process solutions. Setpoint and calibration are manually adjusted with a trimmer and the alarm relay allows for simple control. Readings are automatically temperature compensated, with three different coefficients (beta=2.4, 3.5 or 4.5 %/ºC). The alarm contact can be used for connection to an alarm, pump, solenoid or dosing system. The relay contact is open when readings are higher than the setpoint (+Hysteresis), while for measurements lower than setpoint (-Hysteresis), the relay contact is closed. The Hysteresis is typically 0.20 MOhm/cm around the setpoint. Measurements are displayed on the large LCD and the multicolored LED continuously indicates if the controller is in measurement, dosing or alarm mode. You can also choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. The overtime control system advises you when the relay is active for too long, helping to prevent overdosage. Two models are available, with power supply input at 115/230 Vac or 12 VDC.

BL 983314-0 is supplied with HI 3314 probe, mounting brackets, transparent cover, 12 VDC power adapter and instructions. BL 983314-1 is supplied with HI 3314 probe, mounting brackets, transparent cover and instructions.