Chloride Extended Range - Important for many water testing applications
- High resolution and accuracy
- Simple to use
Chloride is one of the most common ions present in water. In drinking water, its level must be kept low because it can badly alter the taste. In other applications, the chloride level must be monitored to prevent scaling and corrosion. In high concentrations, chloride can corrode even stainless steel and it is very dangerous for vegetation. HANNA Instruments® presents a new test kit for chloride analysis. HI 3898 allows the user to determine high concentration of chloride in waste water, which can interfere with official COD analysis methods. This test, according to the ISO 15705:2002 method, indicates chloride interference in seconds. The concentration is considered too high if the chloride concentration is higher than 1000 ppm (for COD test according to the ISO directives) or higher than 2000 ppm (for COD test according to the US EPA, APHA, AWWA and WEF methods). If a high concentration of chloride is found, the sample must be diluted. |
|
|
Range | 500 to 10000 mg/L Cl-; 5000 to 100000 mg/L Cl- | Analytical Method | Titration | Chemical Method | Silver nitrate & Titration | Smallest Increment | 100 mg/L and 1000 mg/L | Number of Tests | 100 | Weight | 1.5 lbs (664 g) |
|
|
Weight:
1.50 Pounds |
Dimensions:
0.00(L) x
0.00(W) x
0.00(H) Inches |
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|