Conductivity Analog Controller - Available in four models with different ranges
- Direct connection up to 5 m, without intermediate amplifiers, to the conductivity probe
- Isolated recorder output
These controllers allow the direct connection of a potentiometric conductivity probe (HI 7638) with a cable up to 20 meters long, without using any transmitter. Four different models are available with different measurement ranges, to satisfy any application requirements. The output configuration for connecting a recorder or a PLC can be chosen between 0-20 or 4-20 mA. The LED on the front panel indicates the operating status of the controller. The automatic temperature compensation (ATC) is performed directly by the HI 7638 probe with built-in temperature sensor. The front panel is protected behind a transparent splash-proof cover.
The HI 943500 series is supplied complete with mounting brackets and instructions. |
|
|
| Range | HI 943500A, D: 0.0 to 199.9 ; HI 943500B: 0.00 to | | Resolution | HI 943500A, D: 0.1 mS/cm; HI 943500B: 0.01 mS/cm; | | Accuracy (@20°C/68°F) | ±2% of F.S. | | Temp. Compensation | Automatic from 0 to 60 °C with 2% temperature coef | | Readout | 4-digit LCD plus graphic symbols | | Recorder Output | 0 to 20 mA or 4 to 20 mA (isolated) | | 1Setpoint Relay | Isolated, 2A, Max. 240V, resistive load, 1,000,000 | | 1 Alarm Relay | Isolated, 2A, Max. 240V, resistive load, 1,000,000 | | Battery Type / Life | 110/115V; 50/60 Hz or 220/240V; 50/60 Hz | | Environment | 14 to 122°F (-10 to 50°C) | | Dimensions | DIN 43 700 5.7 x 2.8" (144 x 72mm) | | Weight | 2.2 lbs. (1Kg) | | Panel Cutout | 5.6 X 2.7" (141 x 69 mm) |
|
|
|
Weight:
2.20 Pounds |
|
Dimensions:
0.00(L) x
0.00(W) x
0.00(H) Inches |
|
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|