Small quantities of silver are bacteriostatic or bactericidal. As a result, it is at times used in disinfection of pools and spas, as well as in water filters. However, the presence of silver in water is generally indicative of pollution from mainly film manufacturers, film processors and surface finishers. In fact, silver levels are closely monitored in these sectors since its presence can cause discoloration of the skin, eyes and mucous membranes. Order Information: HI 96737 is supplied with (2) sample cuvettes with caps, 9V battery and instructions. CAL CHECK™ standards and reagents sold separately.
|
|
Range | | 0.000 to 1.000 mg/L (ppm) | Resolution | | 0.001 mg/L (ppm) | Accuracy | | ±0.005 mg/L ±10% of reading @25°C | Light Source | | Tungsten lamp | Light Detector | | Silicon photocell with narrow band interference filter @ 575 nm | Environment | | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | Power Supply | | (1) 9V battery | Auto-off | | After 10 minutes of non-use in measuring mode; after 1 hour of non-use in calibration mode | Dimensions | | 192 x 102 x 67 mm (7.6 x 4 x 2.6”) | Weight | | 290 g (10 oz.) | Method | | PAN method. | Typical EMC Dev. | | ±0.001 mg/L |
|
|
Weight:
0.63 Pounds |
Dimensions:
0.00(L) x
0.00(W) x
0.00(H) Inches |
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|