HI 98111 Piccolo® and HI 98112 Piccolo®2 - Accuracy of a bench meter at the fraction of the cost
- Measures pH wherever you need to
- Sealed electrode designed to cope with humid & dusty conditions
PICCOLO® is a revolutionary pH meter with a 4-in-1 electrode and amplifier. Conventional pH meters are susceptible to the weak high impedance signal which makes the electrode, connector, cable and meter delicate and vulnerable to noise, humidity and dirty environments. PICCOLO® has overcome these problems with a pre-amplified electrode delivering a strong signal to the meter. The 4-in-1 interchangeable electrode is inexpensive and rugged and houses the pH sensor, reference system, temperature sensor and the amplifier module.
All PICCOLO® models are supplied complete with pH electrode, pH 4.01 & pH 7.01 sachets, calibration screwdriver, batteries, rugged carrying case and instructions. HI 98111 (PICCOLO®) is supplied with 90 mm HI 1280 amplified pH electrode HI 98112 (PICCOLO®2) is supplied with 160 mm HI 1290 amplified pH electrode. |
|
|
Range | 1.00 to 13.00 pH | Resolution | 0.01 pH | Accuracy (@20°C/68°F) | ±0.01 pH | Typical EMC Deviation | ±0.01 pH | pH Calibration | Manual two point through Offset and Slope trimmers | Temp. Compensation | Automatic from 32 to 158°F (0 to 70°C) | Battery Type / Life | 3 x 1.4 Volts; approx. 100 hours of continuous use | Environment | 32 to 122°F (0 to 50°C); RH 95% | Dimensions Piccolo® | 194 x 29 x 15 mm | Dimensions Piccolo®2 | 265 x 29 x 15 mm | Weight Piccolo® | 70 g | Weight Piccolo®2 | 70 g | Electrode Piccolo® | HI 1280 | Electrode Piccolo®2 | HI 1290 |
|
|
Weight:
0.75 Pounds |
Dimensions:
8.00(L) x
2.00(W) x
2.00(H) Inches |
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|