VanGuard Eyepiece Reticles are an essential addition to microscopes for measuring, counting, or positioning. All reticles come installed in a 10X, 15X, or 20X
eyepiece. This group lists the Howard Mold Count (HMC) and Walton & Becket (3:1 Ratio) models.
|
Reticle Diameter (mm): |
19 |
|
Eyepiece: |
10X |
|
Field of View (mm): |
18 |
|
For Series Model(s): |
1200CM, 1200MM, 1200CMI, 1200ECM |
|
Packaging: |
ea |
|
|
|
Reticle
Selection
When selecting the proper reticle, ONLY the objective
power should be taken into consideration. The following
equation is used:
DESIRED VALUE x OBJECTIVE POWER = RETICLE DIVISION
Example: 0.01mm x 10X = 0.1mm per division
Therefore: 0.1mm x 100 divisions = 10mm/100 parts
(M-44-1522-01 to M-44-1522-037 Series)
Based on the following equation, listed below are
examples of the different values obtained from a single
reticle (M-44-1522-01
to M-44-1522-037 Series),
when used with various objective settings:
RETICLE DIVISION / OBJECTIVE POWER = VALUE PER
DIVISION
0.1mm @ 4X Objective Setting = 0.25mm per division
0.1mm @ 10X Objective Setting = 0.01mm per division
0.1mm @ 25X Objective Setting = 0.04mm per division
0.1mm @ 40X Objective Setting = 0.025mm per division
0.1mm @ 100X Objective Setting = 0.001mm per division
Reticles must be calibrated to each objective for
precise measurements.
|
|
|
|
Weight:
2.00 Pounds |
|
Dimensions:
8.00(L) x
5.00(W) x
4.00(H) Inches |
|
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|
| SKU | Item | Price | |
|
M11997-01 |
M11997-01 : Reticle Diameter 21mm, Howard Mold Count (HMC), Eyepiece Field of View 18mm, Eyepiece 10X, 1 EA |
$185.00 |
|
|
M11997-05 |
M11997-05 : Reticle Diameter 21mm, Walton & Becket (3:1 Ratio), Eyepiece Field of View 18mm, Eyepiece 10X, 1 EA |
$325.00 |
|
|
M11997-08 |
M11997-08 : Reticle Diameter 19mm, Walton & Becket (3:1 Ratio), Eyepiece Field of View 18mm, Eyepiece 10X, 1 EA |
$315.00 |
|
|
|