Material Safety Data Sheet

ESP Chemicals, Inc.
706 E. 46th Street
Tucson, AZ 85713
Toll Free 888-522-3472
Chemtrec 800-424-9300
24 Hour Emergency Assistance
Section 1: Identification
Product Number:A3901
Health:1
Flammability0
Reactivity0
Hazard Rating:
Least0
Slight1
Moderate2
High3
Extreme4
NA = Not Applicable NE = Not Established
Product Name:Aluminum Ammonium Sulfate Laboratory Grade
Trade/Chemical Synonyns 
Formula:AlNH”(SO”)’ ˝ 12H’O
RTECS:None
C.A.SCAS# 7784-26-1
Section 2: Component Mixture
Sara 313ComponentCAS Number%DimExposure Limits:
Aluminum Ammonium Sulfate CAS# 7784-26-1100%W/WNone established
Section 3: Hazard Identification (See Also section 11)
Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
Section 4: First Aid Measures
Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.

FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.

EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen

INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconcious person.
Section 5: Fire Fighting Measures
Fire Extinguisher Type:Any means suitable for extinguishing surrounding fire
Fire/Explosion Hazzards:None Known.
Fire Fighting Procedure:Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing.
Section 6: Accidental Release Measures:
Dispose of in a manner consistent with federal, state and local regulations.
Section 7: Handling and Storage:
Store in a cool dry well ventalated area. Keep away from heat and flame. Do not get in eyes, on skin, or on clothing.
Section 8: Exposure Controls/Personal Protection
Respirtory Protection:Dust Mask

Ventilation:

Mechanical: Protective gloves:NIOSH Approved Gloves
Local Exhaust: Eye Protection:Safety Glasses
Other Protective Equipment: Use safe laboratory handling procedures.
Section 9: Physical and Chemical Properties
Melting Point:95° CSpecific Gravity1.65
Boiling Point:250° C (loses water) Percent Volatile by Volume:information not available
Vapor Pressure:N/A Evaporation Rate:N/A
Vapor Density: N/A Evaporation Standard:
Solubility in Water: Soluble Autoignition Temperature: N/E
Appearance and Odors: White crystals / no odor Lower Flamm. Limit in Air: N/E
Flash Point: N/A Upper Flamm. Limit in Air: N/E
Section 10: Stability and Reactivity Information
Stability: StableConditions to Avoid: None known
Materials to Avoid:
Hazardous Decomposition Products:
Sulfur oxides ( over 1400° F)
Hazardous Polymerization:Will Not Occur
Condition to Avoid:None known
Section 11: Additional Information:
Conditions aggravated/Target organs: None known. Acute: Irritation possible to skin, eyes, lungs, mucous membranes, and GI tract, Coughing. Chronic: None known. Persons with pre-existing skin, eyes or respiratory disorders may be more susceptible.
DOT Classification: Not Regulated
DOT regulations may change from time to time. Please Consult the most recent D.O.T. regulations
Revision No:0Date Entered: 9/1/2005 Approved by: RMC
The Information here in is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether orginating from the above mentioned company or not. Users of this material should satisfy themselves by independent and investigation of current scientific and medical knowledge that the material can be used safely.