TDS tester - Simple to Use
- Affordable
- Ideal for quick, on-the-spot measurements
TDS 1 is a simple and affordable pocket tester for TDS measurements. The measurement is automatically compensated for temperature variations, thanks to its internal temperature sensor. Calibration can be performed in one point with a trimmer. Batteries can be easily replaced after removing the top cover.
TDS 1 is supplied complete with protective cap, calibration screwdriver, batteries and instructions. |
|
|
Range | 0 to 999 ppm (mg/L) | Resolution | 1 ppm (mg/L) | Accuracy (@20°C/68°F) | ±2% F.S. | Calibration Solution | HI 70080P | Calibration | manual, 1 point, through trimmer | Temp. Compensation | automatic, 5 to 50°C (41 to 122°F) | Battery Type / Life | 4 x 1.5V / approx. 150 hours | Environment | 0 to 50°C (32 to 122°F); RH max 95% | Dimensions | 150 x 30 x 21 mm | Weight | 70 g (2.5 oz.) |
|
|
Weight:
0.16 Pounds |
Dimensions:
0.00(L) x
0.00(W) x
0.00(H) Inches |
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|