Please note: This is a special order item and will ship in 6 - 8 weeks.
The Distinction Water Still lives up to its name - rapid, reliable convenient and economical. The distinctive features of the Distinction show a care in the design that puts it apart from other budget water stills, providing safety and quality at a competitive price.
Wide range of benefits usually associated with more expensive models, the Distinction represents unbeatable value for money. Water Supply of 1 liter per minute with a minimum pressure of 3 psi. 220/240V, 50-60Hz, single phase 13A fused with an output of 4 liters per hour. Output water specifications (in parts per million):
-
pH: 5.7 after 2 hours
- Conductivity µS/cm: 4.0 after 2 hours
- Silicon: < 0.5 ppm
- Sodium: < 1 ppm
- Potassium: < 1 ppm
- Calcium: < 1 ppm
- Magnesium: < 1 ppm
- Aluminum: < 0.5 ppm
- Iron: < 0.1 ppm
- Phosphorous: < 0.5 ppm
- Chlorine: < 0.1 ppm
- Residue after evaporation: 2 ppm
- Resistivity meg.Ohm-cm: 0.5 to 1.0
- Pyrogen Content: Pyrogen free
- Temperature: 25 - 35°C
Bibby Sterilin Ltd warrants this instrument - NOT INCLUDING THE HEATER ELEMENT - to be free from defects in material and workmanship, when used under normal laboratory conditions, for a period of two (2) years. Bibby Sterilin Ltd warrants the heater element when used under normal laboratory conditions for up to 1000 hours of use. View the user manual (Adobe Acrobat required). View Certificate of Compliance (Adobe Acrobat required).
Quality of Distillate
pH* 5.7 after 2 hours
Conductivity µS/cm* 4.0 after 2 hours
Silicon <0.5mg/l
Sodium <1mg/l
Potassium <1mg/l
Calcium <1mg/l
Magnesium <1mg/l
Aluminum <0.5mg/l
Iron <0.1mg/l
Phosphorous <0.5mg/l
Chlorine <0.1mg/l
Res. After Evap. 2mg/kg
Resis. meg Ohm-cm 0.5 - 1.0
Pyrogen Content pyrogen free**
Temperature 25-35°C
The above results confirm that the distilled water from our Merit Still conforms to Grade 3 water as detailed in ISO 1696: 1987
**Care is needed to obtain a Pyrogen-free water and the distillate must be tested before use.
|
|
- Safety: All
electrics are fully enclosed and are designed to meet the most recent international
electrical stan-dards. Full compliance with IEC1010 and CE Mark.
- Construction:
The all glass construction including silica sheathed heating element
insures high quality distillate. As there is no metal contact with the water
the Distinction eliminates the risk of ions leaching out into the water.
- Thermal cut-outs:
To prevent the still from over heating in the event of cooling water
supply failure, the Distinction is fitted with two independent thermostats.
One is mounted in the condenser vent tube and the second is mounted inside
the boiler.
|
|
Weight:
1.00 Pounds |
Dimensions:
11.00(L) x
4.00(W) x
2.00(H) Inches |
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|
SKU | Item | Price | |
W11320-01 |
W11320-01 : Water Still, Distinction, Complete, 1 EA |
$0.00 |
|
W11320-03 |
W11320-03 : Boiler Unit Replacement, (for Water Still Distinction), 1 EA |
$0.00 |
|
W11320-04 |
W11320-04 : Condenser Unit Replacement, (for Water Still Distinction), 1 EA |
$815.69 |
|
|
|